Toronto Roofing

Last fall, we installed 7 Velux skylights along with our two ply modified bitumen SBS flat roofing system for our client in Cabbagetown, Toronto.  We performed 2 new manual venting curb mounted skylight installations and installed 5 other fixed and electric venting curb mounted skylights into an existing A–frame box to which we made modifications.  Here you see the installation including all necessary skylight carpentry by our Velux Certified Installers employees.

Here we install a floating walkout wood deck on a flat roof in Riverdale, Toronto.  Last fall we installed the flat roof for our client, this spring we built this roof top deck.  This deck is floating with no puncture or penetration of any sort to the roofing membrane as it should be.

         

 

We recently installed our two ply modified bitumen SBS flat roofing system on a pair of leaking flat roofs in Cabbagetown, Toronto.  The flat roofs were leaking due to improper application of the roofing membranes resulting in both condensation and leakage through the seams.  Watch our roofers cut the membrane and expose a roof that appears to be in good condition yet, contains a significant amount of water underneath and between the membranes.

Our downtown Toronto client's mansard roof was leaking near the valley where the two slopes meet.  Contributing to the leakage was a narrow valley that did not run far enough under the natural slate tiles.  Given the slate tiles on the smaller mansard section were in poor condition we replaced them with new slate tiles cut to match the decorative design and removed and replaced slates on the other section to install a proper width valley.

We recently installed new handsplit medium resawn cedar shakes on a mansard roof in Deer Park, Toronto.  The project also included the installation of our two ply modified flat roofing system and a new skylight.

   

Our Cabbagetown, Toronto clients were experiencing continuous condensation problems with the large 4 x 8' acrylic dome skylight on their flat roof.  To solve this problem M&R Roofing fabricated a custom curb mount "A-shape" frame for their flat roof and mounted two 4 x 4' Velux glass skylights. 

Last week M&R Roofing began another flat roof balconies repair project.  It included carpentry work such as the installation of new roof rafters and deck, followed by the installation of our two ply modified flat roofing system with polyiso insulation in the Beaches, Toronto.

These custom copper flat roof parapet wall caps installed on a coach house in the Annex, Toronto are an example of the custom copper and metal work done by our highly trained and experienced coppersmiths.  M&R Roofing provides various high quality roofing services.

Last week M&R Roofing completed a flat roof balcony repair in Toronto where we installed our two ply modified bitumen flat roofing system with polyiso roof insulation and built a new balcony railing.

A Toronto client's flat roof was leaking during rains.  During a roof inspection we noticed the rubber membrane around the drain was loose and lifting.  We suspected water rushing towards the drain was running under the membrane.  We repaired the area by applying a SBS 250 cap membrane patch.